VINNYCUZ's easy a$$ Tutorial for i730 Wav Ringers

[vinnycuz]

:aw: :aw: :aw: This little tutorial i wrote up is by far the easiest to use because all it involes is opening up your MP3, choosing the sample you like, saving it and then converting it to i730 standard and loading it to the phone...easy huh lets begin...

Item you will need:

1. MP3 Sound Cutter 1.40 (opens mp3s and allows u to cut them and save them as wav files)
2. Cool Edit Pro 2.1 (also known as the new Adobe Audition 1.0, this allows you to change the wav format so its compatible with the i730)

Step 1: Install MP3 Sound Cutter 1.40 and Cool Edit Pro 2.1 to your local hard drive.

Step 2: Open MP3 Sound Cutter 1.40 and hit the open button, then browse to the MP3 you would like to make your ringer out of and hit OPEN

Step 3: Now that your ringer is loaded its time to hit the PLAY button(second green button on the left) to start the MP3

Step 4: To your right there is a have pointing the index finger up, click this when you would like to set the BEGINNING point for this ringer. Then hit the hand with the index finger down to set the END point for this ringer. To insure you have the correct segment

marked hit the PLAY button on the far right this time, this will play just what we have marked as our ringtone segment.

Step 5: Hit the little folder button on the farrrrr right this time with the blue arrow facing down, this will bring up another box for you to save your file, ok so far so good, insure the circle radio button for WAV is marked then just hit the check mark and the file

browser will come up for you to name the wav file. Name your file and click save. *NOTE*

when you save your file make sure you KNOW WHERE U PUT IT so we can open it with Cool Edit!!!!!

Step 6: Open Cool Edit Pro 2.1 (Adobe Audition 1.0) and go to File -> OPEN and find the wav you just saved, select it and click OPEN.

Step 7: Hit F11 on your keyboard and a popup will come up make sure you select these settings.

Sample Rate: 8000
Channels: Mono
Resolution: 8
Clear the Dither check box and uncheck the Pre/Post Filer check box.

Step 7: Hit OK, and then File -> Save, now close Cool Edit and your file is ready for loading.

Happy WAVing

oh and dont hit me up askin me for either application, serial and/or cracks, i do not have them

[Innyboy]

so 85 people can read and prob use this but no one ca say thanks but i will so thanks

[Jimbo]

I do all of my ringers in Cool Edit.
I convert them, chop them up, and save them all using Cool Edit.

[crazysim]

that was mad easy
thanks man

[ds22783]

where can you download mp3 cutter 1.40?
i can't find it anywhere.
do you have a link or something?
thanks,
dan

[raadtad13]

can u send me any techno 1s thank you

[Jimbo]

can u send me any techno 1s thank you

ur kiddin right.

[raadtad13]

the enforcer and kiss and ban my ass becuse this site is no good anyway I cant even find wavs or find out how to search ill tell all my friends never to use it again

[The_Enforcer]

Alright raadtad13, you retard. Are you made because your a dumbass or mad because nobody would spoon feed you the info you wanted?? Oh and tell your friends they can goto Nextelboy's site and play duck duck goose all day with ya. Buh Bye.

[djjeffa]

:aw: what a dumass here is one of his other post

hi everyone i am new to this site but i know alot about phones and i cant find and wav ringtone on this site can someone please help
Thank you
raadtad13

[Jimbo]

...I cant even find wavs or find out how to search ill tell all my friends never to use it again

whose dumbass fault is that? see people, this is a perfect example why it is NOT ok to bang your sister.

[chrisdafrizz]

http://www.frozenwarez.com/dd/cooledit.php#

Just Click the Link Download file 1 if you dont have Cool Edit installed . If you do already Just Download File Two. The registration name and serial Number Is Posted on the site ............... Also i do everything in Cool Edit : open mp3/wav/cda anything , cut , format ........nice and eazy tutorial tho ! good JOB ! :up: Then Load Em ANd ! :dj: BUMP!

[Import3]

thanks man it is so easy now

[ivannahhumpalot]

i've tried a lot of different ways but this by far seems the easiest hats off to you thanks
ivannah

[NaZz]

can someone send em the full version of cool edit?

[oobignick16oo]

chris that link takes me 2 a weid location so if u could post a new 1 thatll b great thx

[kremerov]

chris that link takes me 2 a weid location so if u could post a new 1 thatll b great thx

Check this post to find a working version of Cool Edit Pro CLICK_ME (http://www.djjeffa.com/vb/showpost.php?p=29978&postcount=2)

As far as cracking it goes, we do not support software picacy on this site. There is a way to do it, google it.

[gunityankees303]

if i had a way to get cool edit pro for free could i post it

[kremerov]

if i had a way to get cool edit pro for free could i post it

Before anything more is said, this site does nou support software piracy (cracks/serials).

[nightridaz]

:aw: :aw: :aw: This little tutorial i wrote up is by far the easiest to use because all it involes is opening up your MP3, choosing the sample you like, saving it and then converting it to i730 standard and loading it to the phone...easy huh lets begin...

Item you will need:

1. MP3 Sound Cutter 1.40 (opens mp3s and allows u to cut them and save them as wav files)
2. Cool Edit Pro 2.1 (also known as the new Adobe Audition 1.0, this allows you to change the wav format so its compatible with the i730)

Step 1: Install MP3 Sound Cutter 1.40 and Cool Edit Pro 2.1 to your local hard drive.

Step 2: Open MP3 Sound Cutter 1.40 and hit the open button, then browse to the MP3 you would like to make your ringer out of and hit OPEN

Step 3: Now that your ringer is loaded its time to hit the PLAY button(second green button on the left) to start the MP3

Step 4: To your right there is a have pointing the index finger up, click this when you would like to set the BEGINNING point for this ringer. Then hit the hand with the index finger down to set the END point for this ringer. To insure you have the correct segment

marked hit the PLAY button on the far right this time, this will play just what we have marked as our ringtone segment.

Step 5: Hit the little folder button on the farrrrr right this time with the blue arrow facing down, this will bring up another box for you to save your file, ok so far so good, insure the circle radio button for WAV is marked then just hit the check mark and the file

browser will come up for you to name the wav file. Name your file and click save. *NOTE*

when you save your file make sure you KNOW WHERE U PUT IT so we can open it with Cool Edit!!!!!

Step 6: Open Cool Edit Pro 2.1 (Adobe Audition 1.0) and go to File -> OPEN and find the wav you just saved, select it and click OPEN.

Step 7: Hit F11 on your keyboard and a popup will come up make sure you select these settings.

Sample Rate: 8000
Channels: Mono
Resolution: 8
Clear the Dither check box and uncheck the Pre/Post Filer check box.

Step 7: Hit OK, and then File -> Save, now close Cool Edit and your file is ready for loading.

Happy WAVing

oh and dont hit me up askin me for either application, serial and/or cracks, i do not have them

thanx for that now i dont have to wait for someone to make em.....

[gunityankees303]

nevermind kremov u answered my question thanx!!!!!!!!!

[Blood_NiGgA]

I went to a cell phone and bought a data cable for my i730 but i was told i need to download software what software should i download? Because the data link didnt come with a cd, so i need some type of soft ware. So get back at me my email address is gorillaunit11798@yahoo.com Thanx

:aw: :aw: :aw: This little tutorial i wrote up is by far the easiest to use because all it involes is opening up your MP3, choosing the sample you like, saving it and then converting it to i730 standard and loading it to the phone...easy huh lets begin...

Item you will need:

1. MP3 Sound Cutter 1.40 (opens mp3s and allows u to cut them and save them as wav files)
2. Cool Edit Pro 2.1 (also known as the new Adobe Audition 1.0, this allows you to change the wav format so its compatible with the i730)

Step 1: Install MP3 Sound Cutter 1.40 and Cool Edit Pro 2.1 to your local hard drive.

Step 2: Open MP3 Sound Cutter 1.40 and hit the open button, then browse to the MP3 you would like to make your ringer out of and hit OPEN

Step 3: Now that your ringer is loaded its time to hit the PLAY button(second green button on the left) to start the MP3

Step 4: To your right there is a have pointing the index finger up, click this when you would like to set the BEGINNING point for this ringer. Then hit the hand with the index finger down to set the END point for this ringer. To insure you have the correct segment

marked hit the PLAY button on the far right this time, this will play just what we have marked as our ringtone segment.

Step 5: Hit the little folder button on the farrrrr right this time with the blue arrow facing down, this will bring up another box for you to save your file, ok so far so good, insure the circle radio button for WAV is marked then just hit the check mark and the file

browser will come up for you to name the wav file. Name your file and click save. *NOTE*

when you save your file make sure you KNOW WHERE U PUT IT so we can open it with Cool Edit!!!!!

Step 6: Open Cool Edit Pro 2.1 (Adobe Audition 1.0) and go to File -> OPEN and find the wav you just saved, select it and click OPEN.

Step 7: Hit F11 on your keyboard and a popup will come up make sure you select these settings.

Sample Rate: 8000
Channels: Mono
Resolution: 8
Clear the Dither check box and uncheck the Pre/Post Filer check box.

Step 7: Hit OK, and then File -> Save, now close Cool Edit and your file is ready for loading.

Happy WAVing

oh and dont hit me up askin me for either application, serial and/or cracks, i do not have them

[Jimbo]

this is as close to getting back to you as youre gonna get:
http://www.djjeffa.com/vb/showthread.php?t=1110

[terymoma]

how do i load it onto my phone with webjal?

[Masterlu]

how do i load it onto my phone with webjal?

There is a whole thread HERE (http://www.djjeffa.com/vb/forumdisplay.php?f=52) where you can find out how to use webjal.

May the Force be with you :up: