DJJeffa's i95 Disassemble VIDEO Tutorial DONEl

[djjeffa]

Ok Here is the i95 Disassemble VIDEO I made.
I am not responsible for any damage you do to the phone, if you atempt to do this do it at your own risk!!!

[Nxi95CL]

:beer: hey thnks DJJeffa the video was PERFECT!!! I had no problem changing houseing :beer:

[lees324r]

djjeffa,
I don't see video and I'm register whats up with that?

I'm having problems taking apart I730 back was easy but the front part is crazy the flip how do you take it apart

[djjeffa]

first please dont double post and second click where it said download in my first post above so you could see the video

[Partsman]

^^^ took care of that. ^^^ :wink:

[billdubau]

awesome video. ive seen it done a few times but im not even thinking about messing up my phone.

[Wazzup22]

Im confused with the first part of the video, where the flip part of the phone is being disassembled. what tool is being used and how do i go about doing this?

[crazysim]

you can use a small flat head screwdriver
on the right side of the i95 is where the spring is so you stick into where the spring it and you push it to the other side and itll come out

[imgballer42]

Ok Here is the i95 Disassemble VIDEO I made.
I am not responsible for any damage you do to the phone, if you atempt to do this do it at your own risk!!!

WARNNING DO AT YOUR OWN RISK!
If you dont see the Video below its is because you are not registered or you are not logged in.
Click here to register (http://djjeffa.com/forum/profile.php?mode=register)

edit: okay i see it now thanks!!!!!!!!!

[doogkie]

whats size is the torx screwdriver that u used take take out the screw?

[Partsman]

whats size is the torx screwdriver that u used take take out the screw?
T8 on the body, T6 on the flip

[XxxJuSsBL4zExxX]

I tried downloading the i95 Disassemble VIDEO but im having problems with it. Can someone email it to me xxxju5sblazexxx@aol.com it would be greatly appreciated. THANKS

[djjeffa]

I tried downloading the i95 Disassemble VIDEO but im having problems with it. Can someone email it to me xxxju5sblazexxx@aol.com it would be greatly appreciated. THANKS
its 10 megs , its too big to email

[clearbluei90]

any i95 assembly video i can find anywhere? thanks. o yea....djjeffa, got any tips for looping the ribbon? thanks

[Billyjr]

any i95 assembly video i can find anywhere? thanks. o yea....djjeffa, got any tips for looping the ribbon? thanks

The link is right there at the top!

[clearbluei90]

i downloaded it already. its a disassembly video, not Assembly

[Billyjr]

i downloaded it already. its a disassembly video, not Assembly
my badd didnt realize u wanted the Assembly video

[djjeffa]

bump the vid is in the first post

[codee]

its 10 megs , its too big to email
The one on the thread is 1.75 mb, and it wont play in wmp after I downladed it?

[djjeffa]

The one on the thread is 1.75 mb, and it wont play in wmp after I downladed it?
wel now its only 2 megs cause too many pepole were downloading it and it was slowing down the site I just dowloaded it and played it witj wmp with no problem try upgrading your wmp.

[QBoro187]

any i95 assembly video i can find anywhere?
he djJeffA can u please do you by any chance have an ASSEMBLY video for the i95 or was wondering if you can make one? it would be real helpfull cuz from the look of the dissassembly vidoe it looks like a needle in a hay stack just to take it apart.

[djjeffa]

honestly if you cant put a i95 togrther after taking it apart I dont recomentd you do it.

[Partsman]

honestly if you cant put a i95 togrther after taking it apart I dont recomentd you do it.
or get a busted one to practice on. then if you F it up, oh well

[aznze12o]

any i95 assembly video i can find anywhere? thanks. o yea....djjeffa, got any tips for looping the ribbon? thanks
i wanna know is there any good tips for wraping the ribbon cuz i heard it was a pain

[Cinco5]

Be careful....





Actually don't wind it too tight but dont leave it too loose, and take your time. Personally I think i90's are harder to wind because the whole screen is attached and moves all over as you are winding it.

[Billyjr]

Be careful....





Actually don't wind it too tight but dont leave it too loose, and take your time. Personally I think i90's are harder to wind because the whole screen is attached and moves all over as you are winding it.
its not that hard...i just did that tonight....just be careful the ribbon is VERY fragile

[GaNgStAjEw825]

in the beggining when you take the flip apart from the phone how do u do that??

[KanyeWest6]

in the beggining when you take the flip apart from the phone how do u do that??
take a very small flat head open the flip and between the flip and status light put the flat head in there squeeze it in then push left and lift up it should come out

[GaNgStAjEw825]

it doesnt come out i try ..... but uts just about to break it

[aznze12o]

it doesnt come out i try ..... but uts just about to break it

put the flat head in the right side of the ride hinge shove it in the move u can do it open itz ezer and then if u dont see it go in just push it in more and then u should get it or move the flat head alitto uper or downer ~~ hope that helped if not try a smaller flat head

[GaNgStAjEw825]

put the flat head in the right side of the ride hinge shove it in the move u can do it open itz ezer and then if u dont see it go in just push it in more and then u should get it or move the flat head alitto uper or downer ~~ hope that helped if not try a smaller flat head


thanks a lot ...u da best..it works ... now one more prob..when i put the new housing in how do i roll the lcd wire into the hinge???

[aznze12o]

thanks a lot ...u da best..it works ... now one more prob..when i put the new housing in how do i roll the lcd wire into the hinge???

glad it worked um the lcd ribbion just dont roll it too loose or too tight and handle it with gentle hands it rips ezer then paper ... ill post a pick of it in a few

[aznze12o]

heres a low quality crazy fireworks tutorial for the i95 re assembly flip itz pretty ez if u ask me but i did it like 50 times so i dunno about u

:edit:
if any questions email me at lkevin710@gmail.com or aim me at aznlkidz or pm me lol

[scarface130]

great stuff managed to open and change ma i95 faceplate