View Full Version : i730 NO SERVICE PLZ HELP!
i730user
04-12-2004, 09:13 PM
Today I was puting in a new keypad. I pryed a little on the lower right hand corner of the board because it was stuck in the socket. So I put everything back together. Power it up and I cant get any service it will flash into service once aand hour. I would have to be very close to a window or sumthin. Inormally dont get serivce in my house (a bar or two) and now nothing. The other phones work fine. I tryed a master reset, nothing can any one help?
NDredsox
04-12-2004, 11:49 PM
Look on your boards and see if you see anything missing, like a cover to of the little square circuits. I had a friend that did the same thing. Same way you described and the circuit cover came off. It was trashed and had to be replaced.
i730user
04-13-2004, 12:55 AM
Nope nothing came off looked every where.
NDredsox
04-13-2004, 11:45 AM
Well the way you explained it, sounds just like what happened to him. Signal is hardware issue, not a software issue, especially if this occurred while doing a housing change. You might try to put it back into the oem housing and see if the signal increases.
i730user
04-13-2004, 11:58 AM
I had a housing change about 2months ago....hapened yesterday when I was changing keypad :aw: :aw:
NDredsox
04-13-2004, 12:21 PM
Go back to whatever point it worked and try it again. If it works then the keypad was doing it, if it doesn't work then you know its not the keypad.
i730user
04-13-2004, 12:47 PM
...still nothing...once i did a master reset i went to network id and its all blank is that a prob?
XsTrEeTfLyErX
04-14-2004, 04:06 PM
hey try this out
this happened on one of my i90's and i fixed it maybe it will work for you
with the phone on
hit #,*,Menu, Right fast
then go down toe "current freq"
and hit ok once in side, the phone will start searching for a frequency that has serive once it has service do the above steps and go bakc to current frequency and hit ok once again to turn it off
i730user
04-14-2004, 04:51 PM
Nothin cant find a signal
XsTrEeTfLyErX
04-14-2004, 05:08 PM
how long did you let it search for? i left mine on for about 15 minutes and walked aroudnt eh block lol and when i got home i finally beeped that i had service
i730user
04-14-2004, 05:17 PM
3 mins maybe ok I'll let it search for awhile maybe I should put it outside lol
XS EDIT:
Post 2 - Should it be blinking? The frequency?
Post 3 - It didnt work I took it outside and it beeped.....but I came back in and nothing.
Post 4 - could it be the am housing maye i need a new housing
XsTrEeTfLyErX
04-14-2004, 10:40 PM
it could deffinatly be the housing, if you got service out side, post a pic of your housing i know the am chrome housings and anything painted on the outside with a matalic look sucks with service
NDredsox
04-15-2004, 01:15 AM
WTH??? Did you really need to make 4 posts in a row????
i730user
04-15-2004, 06:47 AM
Sorry Man, Yea I just ordered a new housing...hopefully that helps
chuyzama
08-08-2004, 09:37 PM
you know what i have the same problem my i730 barely gets service 97 percent its no service if you figure out whats the problem let me know and also can you tell what sim card are you running the telephone with?
thanks
vBulletin® v3.8.2, Copyright ©2000-2012, Jelsoft Enterprises Ltd.