PDA

View Full Version : Flashing Sides on i730

aiello1
04-07-2004, 06:29 PM
Hi guys. I was wondering if anyone here has instructions or a video on how to put the flashing side leds on an i730? Thanks
NDredsox
04-07-2004, 06:45 PM
You mean the inserts?
aiello1
04-07-2004, 06:54 PM
yeah - i bought one from daydeal and wanted to know how to install it. Any info on them?
NDredsox
04-07-2004, 08:12 PM
thow up a pic....I have never messed with one of those.....Does it have contacts for the battery or solder points?
aiello1
04-07-2004, 09:53 PM
heres a pic: http://www.daydeal.com/nextel/i730/i730flashingside150.jpg
djjeffa
04-07-2004, 10:30 PM
looks like it connects to the battery terminalss , it shouldent be to hard.
NDredsox
04-08-2004, 06:34 PM
If that is the same one I saw, It goes on the sides of your boards and the ribbon goes to the battery terminals. I think thats the same one.
XsTrEeTfLyErX
04-09-2004, 11:01 AM
is it possible to install running lights into the flip off a 730, i want them to run off of the LEDS by the caller id screen and then scroll down from there.
aiello1
04-09-2004, 12:30 PM
would i have to solder anything when putting them in?
XsTrEeTfLyErX
04-09-2004, 01:50 PM
no those just get connected to the battery terminals and they have some double sided tape i believe
NDredsox
04-09-2004, 06:43 PM
Yep thats all!
Jcochran
04-11-2004, 09:10 PM
Post some pics of it. Went does the lights come on?
ruswrestler
04-18-2004, 11:22 AM
ya post a pic im interested in getting these and want to see how they look.
Partsman
04-18-2004, 01:48 PM
^^^ look up about 8 posts . lol ^^^
NyBKlyNtRinI
05-01-2004, 02:20 PM
i tried to put up a pic for sidelights but i get this error

Sorry, but the maximum filesize for all Attachments is reached. Please contact the Board Administrator if you have questions.
ballistik101
10-07-2004, 02:58 AM
I recently bought a flashing side circut, but it only flashes when i have a signal. Is there a way i could hook it up so that it will only start flashing with the cid leds or the keypad leds???
Partsman
10-07-2004, 08:25 AM
I recently bought a flashing side circut, but it only flashes when i have a signal. Is there a way i could hook it up so that it will only start flashing with the cid leds or the keypad leds???
you would have to modify the hardware. Like solder the contact points to your keypad.Even then, I'm not sure it would work.Maybe I'll try it :mrgreen: