i60 LCD Inversion

[djjeffa]

This will show you how to Invert your inner display on a i60.
This is for the pros only I dont Recomend doing this and will not be Responsible for any damage you cause by doing this mod. Do at your own risk! :aw:

Step 1 If you dont know how to get to this point then you should not be doing this mod.Carfully remove outer film, I start it with a razor.


http://djjeffa.com/images/i60%20inversion/1.jpg

Step 2 Peel the film off slowly becarfull or lcd could crack.


http://djjeffa.com/images/i60%20inversion/2.jpg

Step 3 Clean all the glue that is left off the lcd.


http://djjeffa.com/images/i60%20inversion/3.jpg

Step 4 Rotate the inversion film so the screen looks dark then cut a peice.Make sure you have it right if the screen loks like it dose when the phone is off then you got to rotate the film 180 degrees.It should look like the picture below.

http://djjeffa.com/images/i60%20inversion/4.jpg

Step 5 Peel the film of the sticky side and aplly it to the lcd, start from one side and work your way to the other side making sure you get all the bubbles out too then peel off the outer film and put it back together.

http://djjeffa.com/images/i60%20inversion/5.jpg

Well thats it good luck and be carefull. :up:

[djjeffa]

Here is a pic of a I60 Inverted whith white led's :up:

[rbf351]

now that looks nice, but dnagerous to do if u have no clue what u are doing

[Chris3683]

I tried this on a v60, looks cool as hell but I would not do this if i were you. I broke a ribbon and now my outer lcd dosent lite up.

[lilmillaaa]

yo jeff pretty sikk modd i did it nd i cudnt get the bubbles out nd i scratched the corner of the lcd a lil but all in all i think its pretty hot the bubbles arent as bad as they look in the pics

[huntnfishn05]

Where do u get the inversion film or is it the pecie you peel off

[XsTrEeTfLyErX]

i believe you can use hte same film and then just rotate it? is this true? :thinking:

::well:: being the cheap bastard that i am, i wanted to first see if i could remove the film with out breaking the screen before i went and bought inversion film

well it was a success now i need to get some film

Hey how come ur inversion is like bluish and when i do my inversion wiht the oem film its black an white,

[huntnfishn05]

I Managed to get the original film off but where can i get more

[XsTrEeTfLyErX]

lol same problem im haivng, im using the oem flim for now it looks like shit htough and its not wide enough