NDredsox
03-10-2004, 12:08 AM
This is a post from Djjeffa in the hardware section, not mine:
First I would like to thank EKo For her help on this. :up:
Do this At your own Risk!!!!
Click Here for King of cells i730 tutatorial (http://www.djjeffa.com/forum/viewtopic.php?t=107)
Remove 4 t6 screws.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7301.jpg
Seperate Back panel.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7302.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step1.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step2.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step3.jpg
Slide Plastic card between boards as shown in pic and wiggel it down, then seperate boards.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7303.jpg
Unplug lcd ribbion and remove board and keypad.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7304.jpg
Remove t4 and on some models t6 screw.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7305.jpg
Use pick or small screwdrive to press spring hing in while pulling flip out and slide ribbion out of keypad housing.
Careful with the ribbion!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7306.jpg
You could use a your fingernail to pop of the disc and slide a plastic card under the panel to remove you may want to use alittle heat, Then remove the 4 t6 screws.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7307.jpg
Unplug inner lcd and lift off lcd, Lift of gray ribbion cover and slide out ribbion spool after that just pop out the ear peice ans outer lcd assembly. Dont forget to pop out the mic too!!!!!
Careful with the ribbion!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7308.jpg
Now your done taking it apart good luck putting it back together!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/730.jpg
First I would like to thank EKo For her help on this. :up:
Do this At your own Risk!!!!
Click Here for King of cells i730 tutatorial (http://www.djjeffa.com/forum/viewtopic.php?t=107)
Remove 4 t6 screws.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7301.jpg
Seperate Back panel.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7302.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step1.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step2.jpg
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/step3.jpg
Slide Plastic card between boards as shown in pic and wiggel it down, then seperate boards.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7303.jpg
Unplug lcd ribbion and remove board and keypad.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7304.jpg
Remove t4 and on some models t6 screw.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7305.jpg
Use pick or small screwdrive to press spring hing in while pulling flip out and slide ribbion out of keypad housing.
Careful with the ribbion!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7306.jpg
You could use a your fingernail to pop of the disc and slide a plastic card under the panel to remove you may want to use alittle heat, Then remove the 4 t6 screws.
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7307.jpg
Unplug inner lcd and lift off lcd, Lift of gray ribbion cover and slide out ribbion spool after that just pop out the ear peice ans outer lcd assembly. Dont forget to pop out the mic too!!!!!
Careful with the ribbion!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/i7308.jpg
Now your done taking it apart good luck putting it back together!
http://mysite.verizon.net/vze2n4wj/sitebuildercontent/sitebuilderpictures/730.jpg